Red light Mat, single

The “Red Light Mat Single” is a comfortable full-body mat design for home use. This device combines the popular wavelengths of 660 nm red light and 850 nm near-infrared light.

Equipped with 1280 LEDs, the "Red Light Mat Single" ensures complete coverage of the body, making it useful for daily relaxation, stress relief and general well-being.

Operation is simple and intuitive: connect the device to the supplied controller, plug it in with the supplied adapter and power cord, and select your preferred settings. The control panel allows you to set the timer (10–90 minutes), choose between five intensity levels (P1–P5) and switch between ‘constant’, ‘10 Hz’ or ‘40 Hz pulse’ modes.

The "Red Light Mat Single" is lightweight, flexible and comfortable for regular home usage. The design ensures even heat and light distribution, so you can enjoy your red light in many usage scenarios.

Irradiance at 0 cm: 41.5 mW/cm²

We measure our panels with a Hopoocolor OHSP-350IR spectrometer at a standard 15 cm. A mat isn't used at 15 cm. You lie directly on it, so we measured it at contact distance (0 cm) instead: 41.5 mW/cm² across 380–1050 nm. Because the distance is different, this figure can't be compared with panel figures quoted at 15 cm.

Reading the spectrometer chart

The tall peak is the 660 nm red light and the smaller peak is the 850 nm near-infrared. The chart is scaled to the highest peak, and spectrometer sensors are less sensitive at 850 nm, so the near-infrared share looks smaller than it really is. The R ratio, CCT and Duv values are colour measurements for white lighting and don't apply to a therapy device.

Red to near-infrared ratio

Each of the 1,280 LEDs is a triple-chip LED: one 660 nm red chip and two 850 nm near-infrared chips. That gives a red : near-infrared ratio of 1 : 2 (3,840 chips in total).

Full specifications:

Product name: Red light mat
LED lamps: 1280 triple-chip LEDs (1 × 660 nm + 2 × 850 nm per LED, ratio 1:2)
Irradiance: 41.5 mW/cm² at 0 cm
LED service life: 50,000 hours
LEDs dimmable: 5 levels (P1–P5, adjustable)
Beam angle: 45 degrees
Available wavelengths: 660 nm (red), 850 nm (near infrared)
Timer: adjustable from 10 to 90 minutes
Power: 125 W
Power supply: 100 to 240 volts AC at 50 Hz to 60 Hz
Dimensions: 180 x 80 cm
Weight: 4.75 kg
Colour: Black
Operating mode: Continuous operation
Service life: 5 years
Atmospheric pressure: 70 kPa to 106 kPa
IP protection class: IP20
EMF emissions: Negligible